Tuff Country 52910 - Toyota Tacoma 05-14 2 leveling kit - Manual (Page 4)

14. Locate the sway bar hardware. Working on the driver side, secure the sway bar to the knuckle using the hardware.
Make sure to use loctite and torque to 65 ft lbs.
15. Re-install the tires and wheels and torque the lug nuts to the proper torque specifications. Carefully lower the vehi-
cle to the ground.
16. Check and double check to make sure that all steps were performed properly. Once installation is complete take vehi-
cle directly to an alignment center for proper front end alignment.
Congratulations, installation complete!
Special note: After the completion of the installation, Tuff Country EZ-Ride Suspension recommends taking the
vehicle to an alignment shop and having a proper front end alignment performed.
Tuff Country EZ-Ride Suspension recommends that a complete re-torque is done on all bolts associated with
this suspension system. It is the customers responsibility to make sure that a re-torque is performed on all
hardware associated with this suspension system after the first 100 miles of installation. It is also the customers
responsibility to do a complete re-torque after every 3000 miles or after every off road use. Neglect of following
these steps could cause brackets to come loose and cause serious damage to the suspension system and to
the vehicle.
Tuff Country EZ-Ride Suspension packages (2) sets of instruction sheets with this box kit. (1) is for the installer
and (1) is for the customer. The (1) for the customer has some post installation procedure literature and it is the
installers responsibility to make sure that the customer receives a copy of the installation manual along with the
literature.
If you have any questions or concerns, please feel free to contact Tuff Country or your local Tuff Country
dealer.