Tuff Country 55907 - Toyota Tundra 05-06 knuckle 5 lift kit User Manual
Page 3
Hardware bag 55907NB includes:
Description
Quantity
1/2” unitorque nuts
4
1/2” USS flat washers
2
1/2” x 1 1/2” bolts
4
1/4” USS flat washers
12
10 mm fine nuts
4
10 mm flat washers
8
10 mm lock washers
8
10 mm x 25 mm fine bolts
4
3/4” unitorque nuts
4
3/4” flat washers
8
3/4” x 5 1/2” bolts
2
3/4” x 5” bolts
2
3/8” lock washers
6
3/8” nylock nuts
6
3/8” unitorque nuts
8
3/8” x 1 1/4” bolts
4
3/8” x 1” bolts
4
5/16” unitorque nuts
6
5/16” USS flat washers
22
5/16” x 1” bolts
4
5/16” x 3/4” bolts
2
7/16” USS flat washers
8
9/16” lock washers
2
9/16” USS flat washers
5
9/16” x 2 1/2” bolts
2
S10107 (over size washers)
4
Hardware bag 55907NB1 includes:
Description
Quantity
PB2408 (poly bushings)
4
S10082 (.875” x .563” x 2.080” sleeves)
2
S10108 (.520” x .380” x .375” sleeves)
2
S10077 (over size washers)
2
MO2382 (poly bushings)
2
S10136 (.750” x .563” x 1.410” sleeve)
1
MO3778 (poly bushings)
2
S10139 (.750” x .629” x 3.070” sleeve)
1
SUW-916 (9/16” harden washer)
1
PB8297 (poly bushings)
4
BLR01 (front brake line relocation bracket)
2
BLR09 (relocation bracket)
2
ECLIP (rear brake line e-clip)
1
SHOCKTIE (shock ties)
2
LUBE (poly lube packs)
2
S10137 (rear brake line relocation bracket)
1
S10138 (1/4” x 3/4” self tapping screw)
1
WIRETIE (knuckle ball joint boot tie)
2
COTTER01 (cotter pin)
2
S10140 (9/16” fender washer)
2
Special note: Before installation begins, it is the
customers/installers responsibility to make sure that
all parts are on hand. If any parts are missing, please
feel free to call one of our customer service
representatives @ (801) 280-2777.
Recommended tools selection;
Cut off wheel
Sawzall
Torque wrench
Standard socket set
Standard wrench set
Metric socket set
Metric wrench set
Tape measure
Hydraulic floor jacks