XIGMATEK Apache-III CD901 - Manual

AMD INSTALLATION ( K8 / AM2 / AM3 / FM1 )
INTEL INSTALLATION ( LGA 775 / 1155 / 1156 )
Accessories
INSTALLATION GUIDE
STEP 1
Tear the package off the thermal grease,
apply thermal grease evenly to the bottom
of the heatsink.
STEP 2
Remove the blister and sticker from the bottom
of cooler
；Position the mounting clip to either
side of the Retention Module.
STEP 3
Remove the blister and sticker from the bottom of
cooler
ΙPosition the mounting clip to either side of
the Retention Module.
STEP 4
Press the other side of mounting clip until it is securely
fastened. Connect the power connector.
CPU
Thermal Grease
WARING
Keep and store product away from children.
Check the component list and condition of the product before installation. If there is any problem,
contact the shop where you purchased the product to get a replacement or refund.
Xigmatek Co., Ltd. is not responsible for any incidental damage, including but not limited to,
improper use, and problems with electrical power, accident, neglect, alteration, repair, improper
installation, and improper testing.
Incorrect installation may damage the cooler, CPU, and motherboard.
2012 © XIGMATEK Co., Ltd. All rights reserved. All trademarks are the property of their respective owners.
http://www.xigmatek.com
E-mail: [email protected] • [email protected]
PUSH-PIN Female x 4 LGA775/1155/1156
Bracket x 1 PUSH-PIN Male x 4 Thermal grease X 1
A P A C H E
CD901 / 903
1 2 3 4
STEP 1
Tear the package off the thermal grease,
apply thermal grease evenly to the bottom
of the heatsink. CPU
Thermal Grease
STEP 2
Use the INTEL PUSH-PINS to fix the “INTEL LGA775/1155/1156 Bracket” on the motherboard.
STEP 3
Press the other side of mounting clip until it is securely
fastened. Connect the power connector.
A. LGA775: B. LGA1155/1156: