Yetter 2000 Series AllSteer Plus Fertilizer Toolbar - Manual (Page 51)

51
TROUBLESHOOTING
Problem Cause Solution
Setting coulter depth equally
Frame not set correctly Ensure that in operation
the frame is level.
Blade not penetrating
Insufficient coulter spring Tighten coulter spring
pressure. locknut down 1” further.
Coulter incorrectly installed Adjust height of coulter by
sliding shank down at the
clamp kit.
Spring not deflecting
Excessive spring pressure Back off coulter spring
locknut.
Blade
not rotating Bearings too tight See maintenance section
for proper bearing adjustment