Yetter 2967-064 Residue Manager User Manual
Page 17
17
MAINTENANCE
Lubrication Symbols
Lubricate with grease at hourly interval indicated on symbol.
Lubrication Intervals
IMPORTANT: The recommended service intervals are based on normal conditions;
severe or unusual conditions may require more frequent lubrication.
Perform each lubrication and service procedure at the beginning and end of each season.
Clean grease fittings before using grease gun, to avoid injecting dirt and grit into the bearing.
Replace any lost or broken fittings immediately. If a fitting fails to take grease, remove and clean
thoroughly, replace fitting if necessary. Also check for failure of adjoining parts.
BEARING REPLACEMENT INSTALLATION
1. When assembling the spoke wheels, bearing assembly and hubcap, be sure to align the
grease transfer hole in the spoke wheel with the groove in the hubcap and hole in the hub
to allow grease passage.
2. Assemble the wheels, hubs and caps.
3. Grease the wheel/hub/bearing assembly.