Yetter 2984 High Residue Maverick Opener - Manual (Page 9)

9
ASSEMBLY INSTRUCTIONS
STEP 3. Insert the 2960-370 - 3 13/64” spacer bushings into the parallel arms of 3000-122 parallel arm
assembly.
IMPORTANT!!!!!! Apply never-seize lubricant to the bushings before using the Maverick Opener
.
STEP 4. Insert 2) 2502-397 – 5/8” X 5 ½” bolts through the 2984-348 RH bracket and the hub plate 2984-
308 (decal should face out from center of the row) and attach to the parallel arm assembly. Place the
second hub plate 2984-308 onto the 5/8” bolts, then the 2984-347 LH bracket. Install 2) 2502-331 – 5/8” x
1-3/4” bolts into the lower mounting holes of the 2984-347, 2984-348 and the hub plates, secure with the
5/8” lock nuts, do not fully tighten at this time.