Yetter 2984 Series Generation II Maverick Opener - Manual (Page 15)

15
ASSEMBLY INSTRUCTIONS
2984-003 – RESIDUE MANAGER
STEP 6. Attach the 2967-265 combo arm to the opener. On the left hand side, insert a 5/8” x 3” bolt
through 5/8” flat washer, 9/16” bushing, combo arm, flat washer 21/32” ID x 1 ¼” OD x ¼” thick and the
lower hole of the L.H. knife mount and secure with 5/8” lock nut.
STEP 7: Attach the spoke wheel assemblies to the 2967-265 combo arm using 3” D-bolt, 5/8” lock washers
and 5/8” hex nuts. Torque 150 ft.lbs.
NOTE: The direction of wheel rotation is important. The bevel should be leading.