Anthem BLX 200 User Manual
Page 7
7
E
N
G
L
IS
H
■About video/HDMI OUT jacks
• You don’t need to make all kinds of video connections
between components. (e/ g., this unit to A/V amplifier, A/V
amplifier to TV and so on.)
Depending on what kinds of video jacks that A/V amplifier
TV, etc. has, we recommend you to make the same kinds
of video connections between components.
■About audio/HDMI OUT jacks
• You don’t need to make all kinds of audio connections,
too.
Connect this unit to A/V amplifier depending on the audio
input jack that A/V amplifier has.
1. Connecting AUDIO OUTs
• Connect these jacks to the AUDIO IN jacks of BD(DVD,
CD, etc.) of your amplifier.
2. Connecting DIGITAL AUDIO OUTs
• Connect either the OPTICAL or the COAXIAL DIGITAL
OUT jack to the corresponding DIGITAL IN jack of your
amplifier. (You don’t need to do both.)
■Notes :
• When your amplifier is not compatible with the digital
signals that are output from this unit, loud noise or no
sound may be heard from the speakers, and it may be
harmful to your ears and damages the speakers. To
prevent it, you should disconnect the DIGITAL OUTs to
your amplifier and make analog audio connection.
• When making the COAXIAL DIGITAL connection, be sure
to use a 75
Ω COAXIAL cord, not a conventional AUDIO
cord.
3. Connecting COMPOSITE VIDEO OUT
• Connect this jack to the (composite)VIDEO IN jack of your
amplifier or TV.
4. Connecting COMPONENT VIDEO OUTs
• Connect these jacks to the COMPONENT VIDEO OUT
jacks of your amplifier or TV.
• When making COMPONENT VIDEO connections,
connect “Y” to “Y”, “P
B
” to “P
B
” (, “Cb”, “B-Y”), “P
R
” to “P
R
”
(, “Cr”, “R-Y”).
■Notes :
• If the resolutions of the video signals which are output
from the COMPONENT VIDEO OUTs and/or the HDMI
OUT and your TV are not matched, the picture is not
clear, natural or displayed.
To prevent it, you should set the Resolution to one which
the TV can handle. (For details, refer to “SETTING THE
DISPLAY” on page 31.)
• Do not connect the unit to the TV through a VCR.
Otherwise the picture may be disturbed due to the copy
protection function.
5. HDMI OUT CONNECTOR
• Refer to “CONNECTING TO TV WITH HDMI IN
CONNECTOR” on next page.
6. LAN CONNECTOR
• Refer to “CONNECTING TO NETWORK” on page 9.
7. IR IN JACK
• Refer to “CONNECTING MULTI-ROOM SYSTEM KIT” on
page 9.
8. AC INPUT CORD
• Plug the cord into a wall AC outlet.
Jack type
Video resolution
High
quality
Digital
High Definition :
1080/24p, 1080p, 1080i, 720p
Standard Definition :
480p(/576p), 480i(/576i)
Analog
High Definition :
1080i, 720p
Standard Definition :
480p(/576p), 480i(/576i)
Standard
quality
Standard Definition :
480i(/576i)
Jack type
High
quality
Digital
Standard
quality
Analog
BLX-200(A)_091023:BLX-200(A) 2009-10-26 오 5:52 페이지 7