Cleaning and replacing the filter, Filter, Replacing the lamp (continued) – Anthem LTX 300v User Manual
Page 49: Remove the inner filter, Reinstall the inner filter, Clean the filter
ENGLISH
49
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
Replacing the Lamp (continued)
Cleaning and Replacing the Filter
Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.
Remove the inner filter
CAUTION
●
Pull the power plug from the power
outlet.
MEMO
If the filter is damaged or too
dirty to be cleaned
●
Wash the filter with water and dry it in a shaded area.
●
In extremely soiled cases, using a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
●
After washing the filter with water, make sure that it is completely dry
before reinstalling. Otherwise electric shock or malfunctions may occur.
●
Do not clean the filter with a vacuum cleaner or air duster. The filter is
soft and may be damaged.
●
Replace with a new filter. A dirty filter
will dirty the internal parts of the unit
and cause shadows on the video
image.
●
To purchase a new filter or when it
is dirty in the internal parts, consult
your authorized dealer.
■
Inner Filter Part No.:
Replacement Filter:
the appearance is black
PB006560999 (Inner Filter)
the appearance is white
PB006575099 (Inner Filter)
Reinstall the inner filter
1
2
3
Lift up while pushing the claw
Clean the filter
Check that the left
and right claws are
locked onto the unit