Anthem LTX 500v - Manual (Page 24)

3 Basic Operation
24
Projecting Image
This section describes the basic operations to project input images on the screen.
WARNING
LAMP
ST ANDBY/ON
Preparation
1
Insert the power plug to the power
outlet
2
Turn on the power
●
You can also press the button on the unit to turn on the power.
( P13)
●
The lens cover will be opened.
3
Project the image
1 Select input mode
●
You can also select the input mode by pressing the
INPUT
button on the
unit. ( P13)
2 Play back the selected device
4
Adjusts image focus, size (zoom), and
position (shift).
1 Adjust the focus
Adjust the image size (zoom)
1 Connect to this unit
2 Connect to the power outlet
Light on (Green)
Power Cord
(Supplied)
Light on (Red)
ON
BACK
TEST LIGHT
ASPECT HIDE
INFO
HDMI 1
VIDEO
HDMI 2
S-VIDEO
COMP.
LENS
STAND BY
MENU
CINEMA
3
MENU
POSITION
CINEMA
1
NATURAL STAGE DYNAMIC
USER1
GAMMA C.TEMP
USER2
LENS.
AP.
PIC.
ADJ.
CINEMA
2
INPUT
PICTURE MODE
ON
STANDBY/ON
STANDBY/ON
HDMI 1 HDMI 2 COMP． Video S-Video PC
Adjust accordingly by pressing
the up/down buttons
BACK
Back
Operate
Select
Exit MENU
Focus
Lens Control
LENS
Adjust accordingly by
pressing the up/down
buttons
BACK
Back
Operate
Select
Exit MENU
Zoom
Lens Control
LENS
2
1
2