BBK Performance 18315 - Manual

2010-2013 Ford F-150 Raptor SVT 6.2L V8
Cold Air Induction Kit
Part # 1831
1
INS-184
Special Tools
Required:
• T-20 Torx
Install Time:
Approximately
1 Hour
Difficulty:
2 out of 5
Follow these instructions carefully to ensure correct fitment and operation.
STEP 1 STEP 3
•
Disconnect the Mass Air Flow (MAF) Sensor.
STEP 2
•
Loosen the two 10mm mounting bolts that
secure the factory intake system to the vehicle.
Also remove the clip on the passenger side of
the stock intake system using pliers.
•
Remove the two vent hoses going into the
factory intake system.
The clip needs to be pushed back then rotated down
while pulling on the hose to release it from the fitting.