BBK Performance 2531 - Manual

Polyurethane Axle
Bumpstop
INS-042
I N S T A L L A T I O N I N S T R U C T I O N S
w w w . B B K P E R F O R M A N C E . c o m
IMPORTANT—All appropriate safety equipment (e.i., gloves, tools) must be used during the installation of this product(s).
BBK Performance, Inc. accepts no responsibility for injuries resulting in the installation of any product(s).
Step 1 Start by placing the rear of the vehicle on jackstands –
allowing the axle to hang freely.
! CAUTION !
Use extreme caution under vehicle
Step 2 Unbolt the factory snubber by removing the four bolts which
attach it to the underside of the vehicle.
Step 3 After removing the snubber from the vehicle – the factory
bumpstop bushing can be removed by unbolting it from the
snubber bracket and replacing it with the new BBK unit.
A BBK Company