DAVIS GroWeather/EnviroMonitor: Systems Installation - Manual

For 7455 (GroWeather), 7465 (Energy EM), and 7475 (Health EM)
S
Y S T E M
I
N S T A L L A T I O N
F O R I N D U S T R I A L G R O W E A T H E R ™
A N D E N V I R O M O N I T O R ™ S Y S T E M S
I NTRODUCTION
This manual covers basic industrial GroWeather/EnviroMonitor installation,
including how to connect your sensors to the sensor interface module (SIM)
and how to power your unit. Instructions on installing/mounting sensors and
other system components (such as the Alarm Output Module) are contained in
the manuals for those products. This manual does include several installation
drawings which depict typical GroWeather/EnviroMonitor installations and
should help you connect all of your components correctly.
S YSTEM C OMPONENTS
The system includes the following components. Please make sure you have all
listed components before continuing.
✦ Console with Mounting Base
attached
✦ Sensor Interface Module
✦ 8-foot (2.4-m) 8-Conductor
Cable
✦ AC-Power Adapter
✦ Two #8 X 3/4” Pan Head Self-
Threading Screws
✦ Two 16.5-foot (5 m) Ground Wires
(12 AWG)
✦ Three #6 x 1” (25 mm long) Self-Thread-
ing Screws
✦ Two Cable Ties
✦ Four Adhesive Pads
✦ Two Cable Label Sheets