GReddy FATT Full Auto Turbo Timer - Manual (Page 12)

Operation Check
Vehicle Speed Signal Safety Feature Operation Check
11
(2)
(1) Go over check procedure 4.3
"Parking Brake Feature Check"
before continuing.
Carefully, place the vehicle into gear
and move the vehicle slowly.
Turbo Timer and engine should
then turn off.
This concludes the check
procedures.
During count down,
Place the car in gear
and move the vehicle.
Timer and engine
should trun off.
Turn off the key
switch
Warning !
Before moving your vehicle, be sure that the area around
your vehicle is clear. If not, you may cause an accident.
If the Turbo Timer did not power up, or these safety features
are not working, please recheck all the wiring connections
and then contact your Authorized GReddy Dealer.