GReddy e-Manage: Ultimate Ignition Adaptor User Manual
GReddy For the car
Ignition Adapter 1
Ignition Adapter 2
Ignition Adapter 1
This adapter is for the Nissan NEO straight 6 (ER34, WNGC34) motor. It will remove
the ignition circuit check engine light caused from ignition channel wiring.
This adapter is for the Mitsubishi Lancer Evolution (CT9A). It will remove the
ignitition check engine light and fuel cut caused from ignition channel wiring.
This adapter is for the Acura NSX (NA1). It will remove the ignitition check engine
light and fuel cut caused from ignition channel wiring.
How to Connect
View the diagram below for installing the adapter. Align the CN11 number 1 pin
(furthest to right side) with the pink marking on the side of the adapter.
Before Installing
After Installing
Before Installing
After Installing
Side with Marking (Pink)
Side with Marking (Pink)
Please use caution when installing the adapter to the e-manage Ultimate.