Monoprice 6429 Wall Mount Bracket User Manual
Assembly instructions, Fit screen, Fix to wall
FIT SCREEN
②
BACK VIEW OF LCD TV
(100mm CENTRES SHOWN)
NOTE!
For VESA 100 Mounting Pattern Attach the VESA 100 hook bracket to the back of the TV using
C or E screws provided.
The standard fixing plate suits VESA 75mm and 100mm fixing centers.
FIX TO WALL
①
This product is designed to mount LCD TV weighing up to 30kg to wall.
Safety Warning: Be careful to make sure there are no missing or defective parts. Never use defective parts. Improper
installation may cause damage or serious injury.
Note: The included hardware is for mounting on solid brick, concrete or hard wood batten/studs walls . If mounting on
wood, do not use any concrete ancher. If you are uncertain about the nature of your wall, consult an expert. Please
consult your hardware or installation professional for proper mounting to other types or walls. The supplied hardware is
not for steel.
Forbidden Instruction: Do not mount onto plasterboard or paneled walls.
ASSEMBLY INSTRUCTIONS
FOR FIXED FLAT PANEL WALL MOUNT
A
D
C
x4
x4
F
E
x4
x4
G
x2
6x60mm
M4x12
M5x12
6
SUPPLIED PARTS: Supplied joint
parts are exclusive for using in this
product. Other joint parts are forbidden
to use on this product. If any parts are
missing or faulty, telephone the special
franchiser for a placement.
(a) SOLID BRICK AND CONCRETE BLOCK MOUNTING:
(b) HARD WOOD WALL MOUNTING:
Use the wall plate as a template to mark 2 holes locations on the wall. If the bracket mount onto wood studs wall,
please use a high quality stud sensor to locate adjacent stud. It is a good idea to verify whether the holes you mark
in the centre of the stud. Attach the wall Plate to the wall using for the 2 Lag Bolts A
Note: Do not use any concrete ancher when you mount the bracket onto hard wood wall.
Please check whether screws are fixed well each two months.
IF YOU HAVE ANY DOUBTS REGARDING INSTALLATION CONSULT OUR SPECIAL
FRANCHISER.
TENDING INSTRUCTION
Use the wall plate as a template to mark 2 holes on the wall. Pre-drill theses holes with a 10mm masonry bit to
at least 60mm in depth. Insert a Concrete Anchor into each of those holes. Attach th wall plate to the wall using
2 Lag Bolts A and washers G
Note: This product should be mounted to solid brick, concrete or hard wood
batten/studs wall.
HANG THE TV ONTO THE WALL PLATE
③
4
5
x2
B
10x50
x2
3mm
100mm
120mm
75mm
1
0
0
m
m
1
2
0
m
m
7
5
m
m
21mm
G
B
A
G
A
CAUTION: Do not exceed 30 kg weight limit
C or E or G D or F or H