Monoprice 6524 MHT-26(T) - Manual (Page 3)

Hang the locked screen on the front plate,as
right picture shown.
Be careful when you operate this
bracket ,or you may damage
your screen.
&
'
Angle adjustment
Put the front plate on the wall panel
Fix the wall plate and front plate
(
2) After adjusting the seeing angle ,use M5 inner hexagon spanner to fix the inner
hexagon screw just like above picture shown.
˄
inner hexagon spannerM5
ee
Adjustable angle design can make you enjoy the best optical angle.
Maximum angle is -5º--+15º
After the locked front plate
hang on the wall plate,use a
M4X12 cross pan head to fix
these two parts.