Monoprice 6526 MT-52 - Manual (Page 2)

Component Checklist
Bits Bag
Wall Plate
M8 X50(
M8 X70
x4)
TOOLS REQUIRED:
Power Drill
10mm or 6mm Drill Bit
Phillips Head Screw Driver
Spirit Level
13mm ( 1 /
2
ʾ) Socket Wrench
or Shifter
Security Bracket
(x4 each)
(x4 each)
(
(
x
x 4 each)
M5x16mm
M5x35
16
35
16
35
mm
M6x mm
M6x mm
(x4 each) M8x mm
(x4 each) M8x mm
4 each) Cross pan head screw
1-Left monitor bracket-(BB)
1-Right monitor bracket-(CC)
square spacer (x4)
Spacer(x4)
Spacer(x4) iron spacer(x4)
̛8.2X1.5X̛16 ̛12.7X̛6.0X12.7
̛19X̛8.2X19.6
[[
Timber Stud Wall
Mounting the Wall Plate
Masonry Wall
Note:Ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
TIP:Use a spirit
level to ensure the
Wall Plate is
horizontal
Note:Ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
Installation Instructions
Model Name:MT-52
32”-52”UNIVERSAL TILT WALL MOUNT
‡ The32”-52”Universal Tilt Wall Mount supports LCD
(125 lbs),adjustable wide range tilt:+
and supports a maximum load of 57 kg
.
‡ The manufacturer does not accept responsibility for incorrect installation.
Important Notes
5°/-15°
concrete anchor outside the hexagonal
self-tapping screws(X4)
C J K
M N L
D
E
F
G
H
I
10mm(
concrete anchor
outside the hexagonal
self-tapping screws
iron spacer
3/8”) Hole
Wall Plate
10mm(
concrete anchor
outside the hexagonal
self-tapping screws
iron spacer
3/8”) Hole
Wall Plate