Monoprice 4565 Wall Mount Bracket - Manual

Installation Guide
Monoprice Adjustable Tilt/Swivel Flat Panel Wall Mount
VESA 75/100mm
Max Weight: 66lbs/30kg
Package Contents:
Please review before starting to make sure no parts are missing. If any parts are missing, please
contact us to have replacement parts sent to you.
A
6x60mm
Lag Bolt x 4
B
Concrete Anchor
X 4
C
Wall Mount
X 1
Introduction:
Thank you for purchasing the Monoprice MCD-601S adjustable tilt/swivel flat panel display wall
mount. The MCD-601S is designed to be attractive, durable, easy to install and provide you with
years of reliable service. The mount is designed to be installed on to solid concrete or wood studded
walls. Please review this entire manual before beginning installation. If you are unsure about any
part of the installation process, please consult the advice of a professional installer.
Installation:
Step One:
Disassemble the mount - The Wall mount comes preassembled.
However, before you begin, you will need to detach the display
plate from the wall mount assembly to make installation easier.
Use a 5mm allen wrench to remove the two bolts securing the
display plate to the wall mount assembly.
Figure 1