Monoprice 6977 17-inch Professional CCTV Monitor - Manual (Page 12)

Product Overview
17”/19” User’s Manual
7

☆
PRODUCT
1. Do not cover or block the ventilation holes in the back of the monitor
case.
2. Do not insert any metal objects into the ventilation holes of the
monitor case and be careful not to spill liquids over this product as this
could result in severe injury and damage.
3. Unplug the monitor’s power cable if not to be used for a long period
of time.
4. Do not attempt to dismantle this product. Any attempt to dismantle
or remove the covers from this product will invalidate the warranty
and may also result in serious injury and damage.
5. Do not touch the screen directly with fingers. The oils from your skin
may leave marks on the surface of the screen, which are difficult to be
removed and may damage the screen permanently.
6. Do not apply pressure to the LCD screen. The LCD is very delicate
and fragile component.

☆
MAIN PLUGS ( 2Pin / 3Pin )
1. Do not remove the grounding or earth connection from the power
supply/main plug.
2. Always remember to unplug the LCD Monitor from the power
supply under the following circumstances:
- If the monitor will not be used for a long period of time.
- If the power supply cable or plug / connector is damaged. (Please
refer to the "User Manual" when connecting and disconnecting the
LCD Monitor from any power supply or other systems and before
making any adjustments to the monitor. In the event of any unexpected
situation occurring whilst operating the monitor, please switch off the
power supply and remove the power cable.
- If the problem is not explained in the User Manual, please contact
your local dealer or our customer service department.
- If the monitor housing is damaged or broken.

☆
POWER CORD AND SIGNAL CABLE
1. Do not put anything on the power cord or signal cable.