Monoprice 8745 Wireless N PoE Access Point - Manual (Page 51)

47
minor SSID as AP2: PC1 and PC2 are
connected to AP1, while PC3 connects to AP2.
PC1 and PC2 can communicate with each
other, but neither can communicate with
PC3.
Tip: If you want to isolate all connected
wireless client's communication, enable both
MBSSID AP Isolation and AP Isolation.
 BSSID: Basic Service Set Identifier for the
wireless network. In IEEE802.11, BSSID is
the MAC address of wireless access point.
 Channel: Specifies the effective channel
(from 1 to 13 or Auto) of the wireless
network. Each wireless device on the same
wireless frequency should use a different
channel. In most cases the Auto function will
ensure there is no conflict between devices.
 Extension channel: To increase data
throughput of the wireless network when in
11n mode, the extension channel range is
used.
 Wireless Security Settings