Monoprice 9466 USB Gigabit Ethernet Adapter - Manual (Page 15)

2. Installation and Connection
11
9. You will find that a new Ethernet network interface is available.
* Actual strings depend on your operation system. These screen shots are from MAC 10.4 and
might vary slightly for each operation system.
* Generally, driver would be installed automatically on Mac10.5, but if you can’t connect the
internet by using DHCP, please install the provided driver and follow the instructions as Mac
10.4 installation. There may vary slightly for Mac 10.5.
Now the installation is complete. You can connect the adapter to a network device
by an Ethernet cable.
The Link LED should light up green to indicate a proper physical connection
between the Ethernet adapter and the network. If the Link LED doesn’t light up,
please verify the cable connections between all the network devices.