Arm & Hammer PET FRESH AOR100PF User Manual

Page 2

Advertising
background image

CLEANING AND MAINTENANCE
INSTRUCTIONS

Always turn off and unplug the unit before cleaning.
1. Clean the outside of the Pet Fresh™ Odor Grabber™

appliance with a soft, damp cloth.

2. Remove dust from the air outlet grill with a small, soft brush.
WARNING: Do not allow moisture to come in contact with

the Pet Fresh™ Odor Grabber™ appliance.

FILTER REPLACEMENT INSTRUCTIONS

Check the condition of the filter every two weeks. If you notice

a reduction in odor removal and/or a significant amount of

dust or lint, replace the filter. We recommend changing the filter

every 3-6 months to ensure optimal performance of your Pet

Fresh™ Odor Grabber™ appliance. For more intense odors,

replace the filter every 2-3 months.
1. Turn off and unplug the unit.
2. Turn over the unit and examine the filter.
3. Rotate the Pet Fresh™ Odor Grabber™ filter counter-

clockwise and remove the filter. Insert a new filter and

turn it clockwise to lock it into place. (See Fig. 2)

DO NOT attempt to wash and re-use the filter. Make sure

you remove the protective polybag before inserting the

new filter into the Pet Fresh™ Odor Grabber™ appliance.

Replacement filters are available from your local supplier

or by calling 1-800-5-HOLMES.

When using electrical appliances, basic safety precautions

should always be followed to reduce the risk of fire, electric

shock, and injury to persons, including the following:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance

directly into a 120V AC electrical outlet.

3. If the filter is covered by a bag when shipped: Remove

plastic bag before use.

4. Keep the cord out of heavy traffic areas. To avoid fire

hazard, NEVER put the cord under rugs, near heat

registers, radiators, stoves, or heaters.

5. To protect against electrical hazards, DO NOT immerse

in water or other liquids. Do not use near water.

6. Close supervision is necessary when any appliance is

used by or near children, or disabled persons.

7. Always unplug the appliance before moving it, changing

the filters, cleaning, or whenever the air purifier is not

in use. Be sure to pull by the plug and not the cord.

8. NEVER drop or insert any object into any openings.
9. DO NOT operate any appliance with a damaged cord or

plug, if motor fan fails to rotate, after the appliance

malfunctions, or if it has been dropped or damaged in

any manner. Return appliance to manufacturer for

examination, electrical or mechanical adjustment, or

repair.

10. Use appliance only for intended household use as

described in this manual. Any other use not

recommended by the manufacturer may cause fire,

electric shock, or injury to persons. The use of

attachments not recommended by the manufacturer

may cause hazards.

11. DO NOT use outdoors.
12. Never block the air openings, or place on soft surface,

such as bed or sofa, as this could cause the unit to tip

over thus blocking the air intake opening.

13. Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or

mechanical functions on this unit. Doing so will void the

warranty. The inside of the unit contains no user

serviceable parts. All servicing should be performed by

qualified personnel only.

15. WARNING: To reduce the risk of fire or electrical shock,

DO NOT use this appliance with any solid-state speed

control device.

16. DO NOT place anything on top of the unit.
17. Never place the unit in a pet carrier, kennel, or cage

with an animal.

18. As with any appliance, make sure you locate the Pet

Fresh™ Odor Grabber™ appliance away from pets and

out of the reach of children.

19. Locate the Pet Fresh™ Odor Grabber™ appliance so

that the power cord is not accessible to pets.

F E AT U R E S - O P E R AT I O N S

P L E A S E R E A D A N D S AV E T H E S E

I M P O R TA N T S A F E T Y I N S T R U C T I O N S

PLEASE READ AND SAVE

THESE IMPORTANT

SAFETY INSTRUCTIONS

CORD AND PLUG INSTALLATION SAFETY
INSTRUCTIONS

The length of the cord used on this appliance was selected to

reduce the hazards of becoming tangled in or tripping over a

longer cord. If a longer cord is necessary, an approved extension

cord may be used. The electrical rating of the extension cord

must be equal to or greater than the rating of the appliance.

Care must be taken to arrange the extension cord so that it will

not drape over the countertop or table-top where it can be pulled

on by children or accidentally tripped over.

PLEASE SAVE THESE INSTRUCTIONS

Congratulations on your purchase of the Pet Fresh™ Odor

Grabber™ appliance. Your Pet Fresh™ Odor Grabber™

appliance has an attractive design that can sit on a desk or table.

It is quiet and safe for use around household pets and ideal for

use around litter boxes, pet beds, and small animal cages.The

Pet Fresh™ Odor Grabber™ appliance features Triple Filtration

Technology and HI (II), LO (I) speed settings.

TRIPLE FILTRATION TECHNOLOGY

The Pet Fresh™ Odor Grabber™ filter combines zeolite,

baking soda, and activated carbon to eliminate pet odors.

The zeolite neutralizes acidic odors, while the Arm &

Hammer

®

baking soda absorbs organic odors and the

activated carbon battles gaseous odors.
The best way to reduce odors is to remove the source. Since most

odors originate from pet waste, moisture, and water, it is

important to keep a pet’s habitat and litter area dry and clean.

This will help reduce the occurrence of odors and maximize the

benefit of using the Pet Fresh™ Odor Grabber™ appliance.

PRE-OPERATING INSTRUCTIONS

1. Carefully unpack your Pet Fresh™ Odor Grabber™

appliance and place it on a firm, level surface.

2. Turn over the unit, rotate the filter counter-clockwise and

remove it from the unit.

3. Remove the protective plastic bag.
NOTE: Once the filter has been removed from the protective

plastic bag, it will start to absorb odors and should be installed

in the Pet Fresh™ Odor Grabber™ appliance.
4. Slide the Pet Fresh™ Odor Grabber™ filter back into

the unit (See Fig. 1). Turn it clockwise to lock it into

place.

NOTE: Since the filter absorbs odors even when the unit is

off, we recommend that you place the unit in a plastic bag

when it is not being used. If you have additional filters, keep

them in their protective bags until you are ready to install

them in your Pet Fresh™ Odor Grabber™ appliance.

OPERATING INSTRUCTIONS

1. Place the Pet Fresh™ Odor Grabber™ appliance on a table

or desk in a central location of your room, about 1 foot away

from the wall. Never place the unit in a pet carrier, kennel,

or cage with an animal. As with any appliance, make sure

you locate the Pet Fresh™ Odor Grabber™ appliance away

from pets and out of the reach of children.

2. Plug the unit into a 120V AC electrical outlet. Particular care

should be taken to locate the Pet Fresh™ Odor Grabber™

appliance so that the power cord is not accessible to pets.

3. Slide the speed dial to HI (II) or LO (I).
4. For optimum air filtration, operate the Pet Fresh™ Odor

Grabber™ appliance continuously. Its rugged motor has

been designed to give many years of use.

For continuous use, we recommend that you operate the Pet

Fresh™ Odor Grabber™ appliance on the HI (II) setting. For

quieter operation or for use in a bedroom, select the LO (I)

setting.

THIS PRODUCT IS EQUIPPED WITH A POLARIZED PLUG (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. If the plug does not

fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel

to install the proper outlet.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS

POLARIZED PLUG IN ANY WAY

C L E A N I N G A N D M A I N T E N A N C E

T R O U B L E S H O O T I N G

Model Number

Number of Filters Needed

Filter Number

AOR100PF-U

1

AORF9PF-U

Problem

Unit will not

operate

Decreased air

flow

Solution

• Check to make sure unit is properly plugged in.
• Check to make sure the unit is on by sliding the power switch to ON (II or I).
• Make sure the electrical outlet and circuit breaker are working.

• Check the filter to see if it is in good condition and if it needs to be changed.
• Check to ensure nothing is blocking filtered air outlet.

TROUBLESHOOTING

Fig. 1

Fig. 2

AOR100PF06EM1.qxd 4/20/06 14:02 Page 2

Advertising