Night Owl CS-Key-4GB - Manual (Page 8)

7
1. To charge your keychain, locate the USB cable that was
provided in the packaging. Plug the smaller end of the
cable into the USB connection slot on the keychain.
2. Connect the other end of the USB cable to your computer.
The LED indicator will flash between green and red while
the keychain is charging.
3. Once the keychain is completely charged, the LED
indicator will turn to a solid red color.
Prior to use, please charge your new
keychain using the included USB cable
for 8 hours for optimal performance.
If your battery is running low, the LED indicator
will flash yellow 3 times then again after 2
seconds before it automatically shuts down.
Chapter 5: Charging Your Keychain