Pure Jongo T6 - Manual (Page 5)

3
Connect Jongo to your Wi-Fi
Insert the connector of the supplied mains lead into Jongo ( A) and switch on
the power ( B).
When the Power light turns solid green, briefly press the Wi-Fi
button ( C) on the back and wait for the Power light to flash amber.
Note: If you press and hold the Wi-Fi button, your Jongo will start WPS
compatible pairing mode. To continue with the standard setup, briefly press
the
Wi-Fi button on the back of your Jongo and wait for the power light to
flash amber before proceeding to step 2.
A
B
C