Pure Jongo S3 - Quick Start Guide - Manual (Page 12)

10
Using Bluetooth
For all customers
You can also use Bluetooth to stream all your Pure Connect content, as well as content
from other music services, such as Spotify and Pandora, directly to your Jongo.
A. Enable the Bluetooth option on your mobile device and search for Bluetooth
devices.
B. Pair to one of your Jongos. If your device requires a key, enter ‘0000’.
C. Open the music streaming service that you want to listen to and play a track.
Your music will start to play on your Jongo.
Adding another Jongo to your
network?
Carry out the following steps to add a new Jongo to your network:
A. Switch on your new Jongo.
B. Press and hold the Wi-Fi button on any other Jongo that is already connected to
your network until the Power light pulses green.
C. Press and hold the Wi-Fi button on the back of the new Jongo until the Power light
pulses green.
After about 30 seconds, the Power lights on both Jongos will light solid green to
confirm that the new Jongo is connected to your network.