Pure Tempus-1XT - User Guide - Manual (Page 3)

1
Controls and Connectors
Autotune – press and hold for around two seconds to scan the full range of
digital frequencies in Band III. Press and release to scan UK only Band III.
Standby - press to switch between standby mode and power on
Sleep - press and repeat to set TEMPUS-1 XT to enter standby in 15, 30, 45,
60 or 90 minutes
Info - press and repeat to change the text shown on the bottom of the
display between scrolling text, clock, time and date, programme type,
multiplex name, channel, mode and signal quality.
Menu - press to access the setup menu, turn the Tune knob to scroll through
and push to select an option. You can also press Menu to exit menus and
menu options.
Preset (1-5) - press and hold for around two seconds to store a station
under that number. Press and release to select and listen to a preset.
Press (
) first to access presets 6-10.
Tune - turn to scroll through and push to select radio stations and menu
options.
Vol – turn to adjust the volume.
Backlit LCD screen.
SnoozeHandle™ - tap to snooze an alarm, view clock or station/time/date.
In standby - tap to illuminate the clock or hold for full brightness.
USB - connect to a PC for software upgrades
Digital Out - optical S/PDIF - connect to an external amplifier or recorder
Stereo Out - analogue output - connect to an external amplifier or recorder
Headphone - connect to headphones
Aux Speaker - connect to the optional XT-1 speaker for full stereo sound
9V DC - connect to mains adapter
Aerial - connect to the supplied telescopic or other aerial
Front panel
Rear panel