Aluratek ADMPF119 - Manual (Page 6)

6
Replacing the Remote Contol Battery
If the remote control stops working or works improperly, replace the battery (CR2025
lithiuim battery) with a new one
1. Pull out the battery holder
2. Remove the old battery from the holder and then put a new battery with “ + ”facing up
3. Insert the battery holder back to the remote control
Warning: Battery may explode if mistreated. Do not recharge, disassemble or dispose
of in a fire
Note:
• When the battery becomes weak, the operating distance of the remote may shorten or
function improperly. If this is the case, please replace the battery (CR2025 lithiuim
battery). Use of any other battery may present a risk of fire or explosion
• Displose the used batteries as specified by local authorities
• Do not leave remote in a hot and humid place
• Incorrect use of the battery may cause leaking and corrosion