Pure DMX-25 - Manual (Page 10)

8
Setting the timer/alarm
The timer switches your DMX-25 on (if in standby) at a specified time and tunes to a radio station
or sounds a tone alarm for the period you set.
Setting up a timer/alarm
Select the type of alarm (DAB, FM or Tone), volume, start time, end time and repeat. The
TIMER symbol is displayed when the timer or alarm is set. If you want the alarm to repeat at
the same time each day change the repeat setting to ‘On’.
Switching a timer/alarm on/off
Cancelling a timer/alarm
Using the sleep timer
The sleep timer switches your radio into standby after a number of minutes. The SLEEP symbol
is displayed when the timer or alarm is set.
Setting the clock
The clock is normally set and updated from the DAB signal while the unit is switched on (not
updated in standby). If you have poor DAB reception or want to manually adjust the time you
can switch this option off and set the clock yourself.
<15-:
TIMER
112APSX^
^f_[PhX]V)HTPW
On Off
<15-:
112APSX^
^f_[PhX]V)HTPW
<15-:
2WTRZ BTccX\Ta
301
TIMER
C8<4A
<15-:
+47+3;4--8
B[TT_^UU
+47+3;4--8 +47+3;4--8
SLEEP
B[TT_^]
AT\PX] ! \X]b
87?-:
;<)6,*A76
 )!
+47+3;4--8
2[^RZbTccX]V
301bh]R^UU
2[^RZbTccX]V
!#7^da )"#
TIMER
112APSX^
^f_[PhX]V)HTPW
or