Pure Highway H240Di - Manual (Page 17)

17
Installing the detachable panel
1. Line up the groove on the
right side of the face panel
with the slot on the unit.
2. Press down the left side of
the face plate until it clicks
into the panel slot.
Installing the Highway head unit
1. Insert the mounting sleeve into the dashboard.
Fix it firmly in place by folding down the metal
tabs.
2. Connect the audio, FM/MW antenna and
electrical cables to the back of Highway (see
page 15).
3. Install the detachable panel (see opposite) and
test Highway to check that all audio functions
are working properly.
4. Connect the digital antenna cable.
Note: See page 16 before connecting the
digital antenna cable.
5. Remove the two protective screws on the top
of Highway so that the CD function works and
slide Highway into the mounting sleeve and
push to secure in place.
6. Attach the outer trim frame.
If you are not sure how to install this unit
correctly, contact a qualified technician.
Carrying out a factory reset
1. Remove the detachable panel as described on
page 6.
2. Press the RESET button with a pointed object
to reset Highway to factory settings.
3. Replace the detachable panel as described on
page 6.
Note: Pressing the RESET button will erase the
clock setting and stored stations.
2
2
1
1
Mounting sleeve
Main unit
Trim plate
Remove the
two screws
Mounting bolt
Rubber cushion
Removing the Highway head unit
1. Power off Highway.
2.
Remove the detachable panel as described on
page 6.
3. Remove the outer trim frame.
4. Insert the L-key removal tools into the slots on
the front of Highway until they lock (as shown
in the diagram below).
5. Pull out Highway and disconnect all cables.