Listening to a cd or usb drive – Pure Highway H260DBi User Manual

Page 9

Advertising
background image

9

Listening to a CD or USB drive

Highway can play audio CDs and MP3 and WMA
files that are stored on a CD or USB drive.
Note: Highway cannot play AAC files stored on a
CD or USB drive.

Loading a CD

Insert a CD into the centre of the CD SLOT
with the label facing upwards. The CD will play
automatically after it has been loaded.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may
require a service.

• Some CD-R/CD-RW discs may not be usable.
• CD-ROMs and discs without the following marks

cannot be played by this unit:

Ejecting a CD

Press the

button to eject a CD.

Notes:
• Forcing a CD into the unit can damage the CD.
• If a CD (12 cm) is left ejected for 15 seconds, the

CD is automatically reloaded.

Listening to a CD that is already loaded

in Highway

Press the SOURCE button to select CD/MP3
mode.
When Highway enters CD/MP3 mode, the CD will
play automatically.

Playback controls for an audio CD and MP3/

WMA tracks saved to a CD or USB drive
Fast-forward
Press and hold the

button.

Rewind
Press and hold the

button.

* For MP3/WMA discs, there may be a slight delay

when searching and skipping between tracks.

Pausing playback
Press the 1 button to pause playback. Whilst playback
is paused, ‘PAUSE’ will appear on the display.
To resume playback , press the 1 button again.

Skipping to the next track
Press the

button to skip to the beginning of the

next track.
If you are listening to an MP3/WMA file, press and
hold the

6 button (1 sec.) to move ahead 10 tracks.

Playing the previous track
Press the

button within the first 10 seconds of

the track to go to the previous track.
Playing the beginning of a track
Press the

button after the first 10 seconds of the

track to go to the start of the track.
For MP3/WMA files, press and hold the 5 button (1
sec.) to move back 10 tracks.

Inserting a USB drive

Insert a USB device into the
USB connector.
W h e n c o n n e c t i n g a U S B
device, the unit will read the
files automatically.

Removing a USB drive

Before removing a USB drive,
select another source or
turn off the power to avoid
damaging the USB device.
For more information on
listening to MP3 or WMA files
see the following section.

1

2

1

2

TEXT

Advertising