Racing Electronics RE2500 - Manual (Page 2)

How to operate your RE2500
Getting started and selecting one of the Race Series.
a. Turn the power switch on. The scanner’s display will illuminate.
b. Press and hold the “SQ” button to adjust the volume to a safe and comfortable level before
b. connecting the headset
c. Press the Left Soft Key/ Right (MENU) Key and select Race Series. Note! Series channels must be
c. programmed and will need to be updated for each race.
d. Use the 4-Way Keys to scroll through series options, the series and start scanning all
d. programmed/selected channels within that series.
To Edit Scan List
a. Select Scan List from the main menu. The channels for the selected series will be displayed.
b. Scroll through driver channels and press the Left Soft Key (SELECT/DESELECT) to select /deselect
b. channels on the scan. There is an arrow mark beside the name to identify that the channel has
b. been selected on the Scan List.
c. Press the Right Soft Key to return to Main Menu .
d. When inside Scan List, press MENU Key to enter Secondary Pop-up Menu.
e. Scroll up and down to Highlight Desired function, press Right (MENU) Key to select.
To Edit Favorite Channel
There are two ways to edit a user’s favorite driver, one is from the Main Menu, and another is on scan
mode.
a. From MAIN MENU:
a. - Select Series (series0, series1, series2 or series3).
a. - Select Favorite Channel from the Main Menu. The programmed channels for the selected series
a. - will be displayed.
a. - Scroll through driver channels and press Left Soft Key (SELECT) to assign a priority to the
a. - selected channel.
a. - Pressing the Left Soft Key repeatedly will scroll through the priority selection (3,2,1).
a. - Press Right Soft Key (DONE) when the priority is assigned.
b. To memorize favorite driver on scan mode
b. - Push CAR Key and enter the desired car number, then push CAR or Enter key to make scanner b.
b. - stay on the desired channel. Push and hold FUNC and Numeric Key (1,2,or 3) for 3 seconds to b.
- b. store favorite driver in that key (1,2,or 3). The previous record will be overwritten after above b.
- procedure is performed.
LCD
Display
Features FUNC + FAV: The channel that scanner stays on will be memorized to favorite driver when FUNC
Key pressed and held first, then presses FAV (1,2,or 3) for three seconds. Scanner will go to Favorite
Driver directly if FUNC and FAV Keys are pressed.
The keys with red letter have other functions when they work with FUNC (Function) button.
Two-Step Key (Shortcut Key)
Main Menu
Secondary Menu
The RE2500 scanner has five user editable choices in the main menu - Race Series, Scan List,
Favorite Channel, My Preferences, Programming.
• Race Series: Four series of 110 channels each, there are 110 channels per series 00-09, 0, 1-99.
• Car Numbers correspond with the channel number in the selected series.
• Scan List: Operating with two soft keys and 4-Way Keys can select/deselect channels into/from
• Channel List.
• Favorite Channel: Operating with two soft keys and 4-Way Keys can select/deselect channels
• into/from Favorite Driver List.
• My Preferences: There are 2 items: Backlight, Squelch that user sets.
a. - Backlight: Operating with two soft keys and 4-Way Keys can set the backlight to “On When
a. - Receive”, “On When Key Pressed”, “Always On”, or “Off”.
a. - Squelch: Operating with two soft keys and 4-Ways Key can set squelch level to “Low”, “Mid”, or
a. “Sensitive”.
• Programming: There are 5 items: Keypad Entry, Write - Scanner, Read - Scanner,
• Race Series, and Reset Scanner that the user can program on the scanner.
b. a. Keypad Entry: To enter track/driver frequencies, codes and driver names by manual.
a. b. Write - Scanner: To download track/driver frequencies, codes and driver names from PC or a.
c. a. c. source scanner.
b. c. Read - Scanner: To upload/ track/driver frequencies, codes and driver names to PC or
b. d. destination scanner.
b. d. Race Series: To edit banks name.
b. e. Reset Scanner: To delete all data and return to default setting.
There are two Secondary Menus, one inside Series and the other one inside Scan List. Secondary
Menus are a submenu associated with a primary Main Menu. They are displayed as a pop-up window
on the display screen.
a. Press the Right (MENU) Key while in stop scanning mode, display shows: SCAN LIST, KEYPAD
SE and MANU in the pop-up windows for user to select the desired option.
b. When inside the SCAN LIST, press MENU Key to enter Secondary Pop-up Menu. Scanner shows
SE SELECT ALL, SELECT NONE & MANU for user selection.
2500
GUIDE
USER