Sol TP Series Triple or Quad PV - Manual (Page 10)

10 MKTG-IM-TP34-02-EN-1113
Installation Manual | TP Series
2.6 Drill Battery Mounting & Access Holes; Route PV Harness
4.25” below
Access hole for PV
Harness. Drill thru
one side @ 1.25” Dia.
For dual Battery
Enclosures drill thru
pole.
Battery Enclosure Channel holes:
Drill thru @.87 Dia
.
28”
6” Min. from top of pole
Note: Battery enclosure may be mounted lower than shown.
a