Wixey WR25 Mini Digital Height Gauge - Manual

Wixey TM
Model WR25 Patented US Patent no. 7,580,804
Mini Digital Height Gauge
Instructions
SAFTEY FIRST
• Always turn off the power and unplug power tools before using any gauge.
• Never use power tools without properly installed blade guards. Guards
may not be shown for clarity.
Readout Operation
ON/OFF and ZERO
PUSH MOMENTARILY TO TURN
OFF AND ON
HOLD FOR 3-5 SECONDS TO SET
TO 0.000 (ABS MODE ONLY)
IN/MM
TOGGLES BETWEEN INCHES AND MILLIMETERS
INCH MODE
MILLIMETER MODE
ABS/INC
ABSOLUTE MEASURING MODE
TOGGLES BETWEEN ABSOLUTE
AND INCREMENTAL
INCREMENTAL MODE RE-SETS
TO 0.000
TOGGLE BACK TO ABS MODE
AND THE CALIBRATED
DIMENSION IS REMEMBERED
Problem Possible
Cause Solution
Flashing Digits Low
Voltage Replace Battery
No Display Low
Voltage Replace Battery
No Display Bad
Contact Clean Battery
Erratic or
Frozen Display Internal
Error Remove Battery
Wait 1 Minute
and Replace
Trouble Shooting
INSTALL CR2032
BATTERY
SCALE LOCK
KNOB
Battery installation and locking the scale