Checkers Linebacker 1 Channel Cable Ramps - Manual

ASSEMBLY:
• Inspect areas for safety hazards
• Assemble sections by aligning female connectors over male connectors
• Press with foot to secure female connectors to male connectors
• Install cables as required:
Open Top Model: Install cable/hose line down into channel by pushing
cable or hose through slot into channel or bending protector backward
and length wise to allow larger diameter cable/hose lines through
slot and into channel.
Drop Over Model: Place the protector over the top of
exposed cable/hose.
• Test installation for intended use
• Periodically inspect installation
CHANNEL CAPACITY:
LOAD CAPACITY:
The Cable/Hose Protection System has different load supporting capabilities depending on type of vehicle and
temperature. Suitability must be verified by testing under actual conditions.
OPERATING TEMPERATURE:
-40 ˚ F to 120 ˚ F (-40 ˚ C to 48 ˚ C)
CHEMICAL RESISTANCE:
Tested for compatibility with common motor oils, gasoline and diesel fuel.
Limited resistance to brake fluids and other chemicals.
MATERIAL:
UV-stabilized polyurethane elastomer
NO. OF
CHANNELS
1 Channel (1.25” Option) 11,700 lbs. (5,307 kg)
LOAD CAPACITY PER TIRE
MAX LOAD 70 ˚ F (21 ˚ C)
23,400 lbs. (10,614 kg)
1 Channel (2.25” Option) 8,500 lbs. (3,856 kg) 17,000 lbs. (7,712 kg)
LOAD CAPACITY PER AXLE
MAX LOAD 70 ˚ F (21 ˚ C)
CABLE/HOSE MANAGEMENT COMPONENTS
ASSEMBLY INSTRUCTIONS
#ZIS-GP1
Ver: 2/11
CHANNEL CAPACITY - MAX. DIAMETER INCHES (mm)
1.25” Channel Option 1.25 in. (31.8 mm) width x 1.25 in. (31.8 mm) height
2.25” Channel Option 2.25 in. (57.2 mm) width x 2.25 in. (57.2 mm) height
Simply interlock with
T-connectors to extend
protection length.
36" Lineal Protector
Open Top Model Drop Over Model
Drop over protectors do not prevent
abrasion to cable from below.
WARNING!
GP-
1
HEAVY DUTY
GENERAL PURPOSE
1 CHANNEL SYSTEM