Checkers Rocket II LED Lights - Manual (Page 2)

620 COMPTON ST • BROOMFIELD, COLORADO, USA 80020
800-438-9336 • www.checkersindustrial.com
1. Remove the clear lens
from the base by turning
counterclockwise
2. With the light powered on,
hold the remote close to
the sensor. You may need
to block the light emitting
from the LED’s to enhance
the communication from the
remote to the light.
3. Use the + and - buttons on
the remote to select the flash
pattern desired (see chart)
4. After the flash pattern has
been selected, turn the clear
lens clockwise on to the
upper base
NEW ROCKET™ II LED WHIP LIGHTS
From the Experts in Industrial Safety
PROGRAMMING INSTRUCTIONS
1
2 4
2 2
0
00 .5 11 .5 22 .5 33 .5 4
20
0
20
0
20
0
20
0
20
0
20
0
20
0
20
0
20
IN
TE
NSI
TY (Joules)
TIME (Seconds)
# 1 - Breathe followed by
16 Stockato Flashes
# 2 - Rapid Flash
# 3 - Brighten then Flash
# 4 - Breathe then Flash
# 5 - Slow Blink
# 6 - Flash
# 7 - Steady
# 8 - Increasing Sequential
Blinks
# 9 - Off
Patent Pending
3