EarthQuake Shell ShoXX Gamer set - Manual (Page 8)

8 Shell Shoxx Manual Earthquake Sound Corp. | www.earthquakesound.com
1) Locate the RCA input on your TV where your console is hooked up to.
Note:
If you are using an HDMI cable for your audio/video, you may
have to change the settings in your video game console so that the
audio outputs through the RCAs.
2) Unplug the white left audio supply and plug in one of the RCA Y adaptor’s
(e) male terminals.
3) Reconnect the console’s left audio to the RCA Y adaptor’s (e) female
terminal.
4) Connect the RCA cable’s (d) female terminal to the RCA Y adaptor (e).
Connect the RCA cable’s (d) male terminal to the LEFT line level input.
This uses the mono function.
Connecting to a TV with Video Game Console
Video Game Console
Amplifier
Line Level
Input
Speaker
Output
Power Extension Cord (b)
Left
(White)
Right
(Red)
TV Audio Input
Left
(White)
Right
(Red)
RCA Y Adaptor (e)
RCA female to male (d)