EarthQuake MQB-1 MiniQuake - Manual (Page 4)

How To Connect to an Amplifier
XJ-300R CONNECTION OPTIONS
MQB-1
4-Ohm Parallel
Application
Receiver or Pre-amp
LFE / Subwoofer Out
XJ-300R
LINE IN
HIGH LEVEL INPUT
L
R
L+
R-
R-
L+
SPEAKER OUTPUT
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL 110 - 220, FUSE T3.15AL/250V
220 - 240, FUSE T1.6AL/250V
110 - 220~/60Hz
220 - 240~/50Hz 180 WATTS 110-120V 220-240V
+
Receiver or Pre-amp
LFE / Subwoofer Out
XJ-300R
LINE IN
HIGH LEVEL INPUT
L
R
L+
R-
R-
L+
SPEAKER OUTPUT
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL 110 - 220, FUSE T3.15AL/250V
220 - 240, FUSE T1.6AL/250V
110 - 220~/60Hz
220 - 240~/50Hz
180 WATTS 110-120V 220-240V
+
Receiver or Pre-amp
LFE / Subwoofer Out
XJ-300R
LINE IN
HIGH LEVEL INPUT
L
R
L+
R-
R-
L+
SPEAKER OUTPUT
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL 110 - 220, FUSE T3.15AL/250V
220 - 240, FUSE T1.6AL/250V
110 - 220~/60Hz
220 - 240~/50Hz 180 WATTS 110-120V 220-240V
+
MQB-1
8-Ohm Standard
Application
Q10B
8-Ohm Standard
Application
www.earthquakesound.com 4
Tools that will be needed for installation:
- 16 to 12-gauge speaker cable
- a pair of pliers
- a powered screw driver
- measuring tape
- two (2) wing nut wire connectors or electrical tape