Posey Defined Perimeter Mattress Covers User Manual

Posey, Defined perimeter mattress covers, Cleaning instructions

Advertising
background image

M6148 REV C 102511

© 2011 Posey Company. All rights reserved.

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com

Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014

Fig. 3

Posey Defined Perimeter Mattress Covers offer a low intervention solution to many of the

bed safety issues affecting healthcare facilities today. Wedge-shaped foam sections line

the perimeter of the covers and help provide a gentle reminder to those lying in bed of the

location of the mattress edges, and help provide a less restrictive environment than side

rails.
General features of the Posey Defined Perimeter Mattress Covers:

• 15” (38 cm) openings in the mid-section for easy patient entry and exit.

• Quick-release buckles easily secure the Posey Defined Perimeter Mattress Covers to

the bed.

• Wipe-clean denier nylon with urethane coating.

• Zippered foam compartments to facilitate laundering of cover.

• Elastic fitted corners.

• Models with breathable nylon covers are ideal for low air loss mattress cover

applications.

• Meets CA #117, Section E Flame Retardancy Standards.

This device is not a substitute for side rails

or other protective devices for patients at

risk of injury from falls due to unassisted bed

exit.

AlwAys follow your facility’s policies

and procedures for patient assessment,

monitoring and rehabilitation.

NEVER use

this product with patients in physical

restraints with the side rails down. Serious

injury or death could occur if patient

becomes suspended off mattress surface.

Posey Defined Perimeter Mattress Cover

Fig. 2 - Quick-Release buckles

Fig. 3 - Sheet attachment

clips (5750 only)

Fig. 4 - Removable

foot bolster (5750/5750NC)

Fig. 1 - Elastic fitted corners

Cleaning Instructions:

Wipe Clean. Use mild disinfectant

if required. Air dry. Wipe fluid or other

spills immediately for patient hygiene.
DO NOT use cleaners that contain Phenol or

Benzyl.
Cover only. Remove foam sections.

Disposal

Properly dispose of the product per facility’s policy for BIOHAZARDOUS

materials.

Storage and Handling

This device is designed for use in normal indoor environments. This device may be stored

in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or

high humidity that may damage product materials.

Application Instructions:

1. Inspect product prior to use. Do not use soiled or damaged products.
2. Position the mattress cover over the mattress (Fig. 1), making note of the ends labeled

“Head” and “Foot”.

Applies to models 5750/5750NC.

3. Thread each of the straps located along the edge of the cover through available

openings in the perimeter of the movable section of the bed frame. This will allow the

cover to remain properly fitted to the mattress as the entire bed, head section, or foot

section is raised or lowered. Avoid areas where the straps may interfere with the

lowering and raising mechanism of the bed.

4. Secure the end of the quick-release buckles and tighten the straps securely (Fig. 2).
5. If using a sheet, attach the eight sheet clips, located on the quick-release buckles, to

the sheet (Fig. 3).

Applies to model 5750 only.

6. If desired, attach the foot bolster to the mattress cover using the loop strip sewn into

the cover (Fig. 4).

Applies to models 5750/5750NC.

7. Check for proper fit. Modified beds may not be compatible with Posey Defined

Perimeter Mattress Covers.



Posey

®

Defined Perimeter Mattress Covers

BEd sAFEty

*39” (99 cm) width restricted to air mattresses or mattresses under 6” (15 cm) in height

Model

5750

5750NC

5751

Fits Bed Type

Regular

Regular

Bariatric

Cover Material

Nylon

Breathable Nylon

Breathable Nylon

Fits Mattress

- Height

6” to 8” (15 cm to 20 cm)

6” to 8” (15 cm to 20 cm)

6” to 10” (15 cm to 25 cm)

- Width

34” to 39”* (86 cm to 99 cm)

34” to 39”* (86 cm to 99 cm)

48” (122 cm)

- Length

80” (203 cm)

80” (203 cm)

80” to 86” (203 cm to 218 cm)

Foam Sections

- Height

4” (10 cm)

4” (10 cm)

5” (13 cm)

- Width

5½” (14 cm)

5½” (14 cm)

6½” (17 cm)

- Length

29½” (75 cm)

29½” (75 cm)

32” (81 cm)

Foam Density

Medium

Medium

High

Straps

8

8

4

Sheet Clips

Yes

No

No

Removable Foot Bolsters

Yes

Yes

No

Advertising