Posey Padded Side Rail Covers User Manual

Posey, Padded side rail covers, Monitoring

Advertising
background image

© 2010 Posey Company. All rights reserved.

M6171 REV B 071810

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com

Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014

The Posey Padded Side Rail Covers are designed for Hill-Rom beds
outfitted with rectangular split side rails (Fig. 2), including the
Hill-Rom Centra® 850/852 beds and the Hill-Rom Century®
835/837/840/842 beds.

The padded covers are designed to cover the gaps found within the
side rails to help prevent entrapment, as well as offering a padded
inner panel to help protect the patient from the hard metal
surfaces of an unprotected side rail.

Bed rails may be raised or lowered without removing the padded
protective cover. The covers are designed with clear vinyl windows
specifically for controls located in the upper rails of Hill-Rom
Centra® beds, but can also be used on other Hill-Rom beds noted
above, as well as the lower rails. Meets CA #117, Section E Flame
Retardancy Standards.

REF

5728 Hill-Rom® Centra™, 850/852 and Hill-Rom® Century™,

835/837/840/842 beds, 2 pieces

Monitoring

Posey Padded Side Rail Covers will not prevent a

determined patient from exiting the bed, going over or attempting
to go between or through side rail gaps.

AlwAys follow your

facility’s policies and procedures for patient assessment,
monitoring and rehabilitation.

Application Instructions:

1. Inspect product prior to use. Do not use soiled or damaged

products.

2. Slip side rail covers over each of the upper side rails. note the

orientation of the clear windows on Hill-Rom Centra® beds
(Fig. 1).

3. Secure hook and loop fasteners along the bottom of the padded

protective cover.

4. Lower and raise the side to ensure proper operation and that

the cover does not interfere with the lowering of the releasing
mechanism.

5. Check for proper fit. Modified beds may not be compatible with

Posey Padded Side Rail Covers.

Cleaning Instructions:

Wipe clean with soap and water or disinfectant.
Do not use cleaners that contain Phenol or Benzyl.

Fig. 1

27” to 28” (69 cm to 71 cm)

9”

(23 cm)

Fig. 2 - Padded Covers are designed to fit Hill-Rom

rectangular side rails as pictured above.

Disposal

Properly dispose of the product per

facility’s policy for BIoHAZARDoUS materials.

Storage And Handling

this device is designed for use in normal indoor
environments. this device may be stored in
ambient warehouse temperatures at normal
humidity levels. Avoid excess moisture or high
humidity that may damage product materials.



Bed sAFety

Posey

®

Padded Side Rail Covers

Advertising