Posey Side Rail Wedges User Manual

Posey, Side rail wedges, Monitoring

Advertising
background image

Posey Side Rail Wedges help protect patients from injury by

helping close the gaps around the perimeter of the mattress and

by cushioning the side rails and the headboard or footboard. They

also help to deter the patient’s release of restraints. Each Side Rail

Wedge attaches with hook and loop straps and is made of

durable, medium density foam and covered in soft, water-

repellent vinyl. Meets CA #117, Section E Flame Retardancy

Standards.

REF

5708 35”L x 17”H x 2”D (89 cm x 43 cm x 5 cm)

REF

5708S 30”L x 17”H x 2”D (76 cm x 43 cm x 5 cm)

Monitoring

Posey Side Rail Wedges will not prevent a

determined patient from exiting the bed, going over or

attempting to go between or through side rail gaps. DO NOT

articulate bed if product is applied.

ALWAYS follow your facility’s

policies and procedures for patient assessment, monitoring and

rehabilitation.

Application Instructions:

1. Inspect product prior to use. DO NOT use soiled or damaged

products.

2. With the bed flat, position the Side Rail Wedge on the inside

of the side rail so that the wedge fits snugly between the

mattress and the side rail (Fig. 1).

3. Open the hook and loop straps and reapply them so that the

Side Rail Wedge is secured to the side rail.

4. Check for proper fit. Modified beds may not be compatible

with Posey Side Rail Wedges.

Side Rail Wedges have multiple uses:

Figure A: Use one to close the gap between the half side rails.
Figure B: Use one to cover the half side rail at the head or foot

of the bed.

Figure C: Zip two together to provide full length protection up

to 6’ (1.83 m) of double half rails, three quarter, or full
side rails.

Figure D: Use one at the head or foot of the bed to cover/

protect the headboard or footboard.

Figure A

Figure D

Figure C

Fig. 1

Figure B

Refer to the Posey Catalog for the Posey

product/bed cross-reference guide to check

for compatibility with certain bed models.

Cleaning Instructions:

Wipe clean with soap and water or disinfectant.

Storage and Handling

This device is designed for use in normal indoor

environments. This device may be stored in

ambient warehouse temperatures at normal

humidity levels. Avoid excess moisture or high

humidity that may damage product materials.

Disposal

Properly dispose of the product per

facility’s policy for BIOHAZARDOUS materials.

5708

© 2012 Posey Company. All rights reserved.

M0010 REV C 080712

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com

Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014



Posey

®

Side Rail Wedges

BED SAFETY

Advertising