Posey Abduction Wedge / Knee Separator - Manual

Seating and poSitioning Quality Products since 1937
© 2009 Posey Company. All rights reserved. (Ref: 97)
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014

Posey
®
Abduction Wedge/Knee Separator
Abduction wedge/knee sepArAtor
The Posey Abduction Wedge/Knee Separator helps eliminate abduction contractures
and skin breakdown resulting from prolonged sitting or lying with knees held
together. Promotes optimum healing and helps prevent hip dislocation following
hip replacement surgery. Contoured sides capture the thighs for a more secure hold.
High density foam Wedge covered in soft polyester comfortably maintains 4-5 inches
of knee separation. Designed for use in a wheelchair or bed. Dual hook and loop
straps maintain leg position. Machine washable.
REF
6307 7”H x 4”W x 5”D (18 cm x 10 cm x 13 cm)
6307
6307
wAshing instructions:
Machine wash warm, tumble dry low. For best results, secure straps to wedge
before laundering.
ApplicAtion instructions:
1. Position the patient with hips/knees in alignment in the bed or wheelchair.
2. Insert the Abduction Wedge between the knees as shown (right). The
positioning straps should be underneath (behind) the patient’s knees.
3. Wrap the positioning straps around the outside of each thigh. Secure each
strap on top of the Abduction Wedge with the hook fastener.
Straps should be snug enough to secure wedge comfortably
without impairing circulation. You should be able to insert the flat palm of one
hand between the strap and the thigh.
Monitoring
Be sure to follow your facility’s policies and guidelines for
frequency of patient monitoring. Posey recommends that this product
be removed at least every two (2) hours to check for skin integrity, proper
circulation and range of motion.
disposAl
Properly dispose of the product per facility’s policy for
BIOHAZARDOUS materials.
storAge And hAndling
This device is designed for use in normal indoor environments. This device
may be stored in ambient warehouse temperatures at normal humidity levels.
Avoid excess moisture or high humidity that may damage product materials.
M0909 082009
inspection
Inspect before each use: check for broken stitches; or torn, cut or
frayed material. DO NOT use soiled or damaged products.