Asus AP2400R - Manual (Page 14)

14 Chapter 1: System Overview
Checklist
Features
The AP2400R is configured for the ASUS CUR-DLSR smart
motherboard that uses the ServerSet
TM chipset from ServerWorks ®.
The motherboard supports dual Pentium III processors to accelerate
even the most complicated server tasks. The following are highlights
to the server’s many features. For additional information, refer to the
motherboard user’s manual that comes with the server package.
Chassis: ASUS AR-20
• Chassis: 2U form factor that fits in a standard 19” rack
• SCSI Backplane: Supports six SCSI hard drives using 80-pin
SCA-2 connectors
• Power: Redundant (dual) 280W power supplies equipped with
two universal AC input and ATX-compliant output cables
• Device Bays: Support for one 3.5” slim type floppy device, one
5.25” standard sized CD-ROM drive, and six 3.5” wide/1” high
SCA SCSI hard disk drives in swappable trays
Motherboard: ASUS CUR-DLSR
• Processor: Dual Intel ® Pentium III FC-PGA processors running
up to 1GHz
• Memory: Four 168-pin DIMM sockets that support up to 4GB
PC133 registered SDRAM with ECC support
• Onboard SCSI: LSI ® 53C1010-33 dual-channel Ultra160 SCSI
controller that supports up to 30 SCSI devices using two 68-pin
Wide SCSI connectors
• Onboard LAN: Dual Intel ® 82559 Fast-Ethernet server controllers
that supports 10BASE-T and 100BASE-TX, RJ-45 output
• Onboard VGA: ATI ® Rage XL VGA controller with 4MB PC100
SDRAM
• Integrated Super I/O: PC97317 controller that supports one
floppy, two serial ports, one printer port, two USB ports, one PS/
2 keyboard, and one PS/2 mouse
• Expansion Slot: Three 64-bit PCI slots on a riser card for full-
length PCI expansion cards