Figure 18, Connecting the battery connector to the radiosonde – Vaisala RS92-D User Manual

Page 29

Advertising
background image

Chapter 3 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 27

3.

Connect the battery connector (number 1 in

Figure 18 on page 27

)

to the radiosonde (number 2).

0912-141

Figure 18

Connecting the Battery Connector to the
Radiosonde

4.

The radiosonde has now been activated. Close the battery case.

5.

Check from the sounding system software that the telemetry link is
working well. For detailed instructions on using the sounding
software, refer to the sounding system user manuals.

The radiosonde is now prepared for launch. In order to ensure 120
minutes of flight time, it is recommended that the radiosonde is
launched within 15 minutes of battery connection.

Proceed now to launch the radiosonde.

Advertising