Vaisala WM30 - Manual (Page 8)

User's Guide ________________________________________________________
6 ______________________________________________________ M210375en-A
- Handle ESD sensitive components on a properly
grounded and protected ESD workbench. When this is
not possible, ground yourself to the equipment chassis
before touching the boards. Ground yourself with a wrist
strap and a resistive connection cord. When neither of the
above is possible, touch a conductive part of the
equipment chassis with your other hand before touching
the boards.
- Always hold the boards by the edges and avoid touching
the component contacts.
Regulatory Compliances
The WMS301 and WMS302 sensors comply with the
following performance and environmental test standards:
- Mechanical vibration test per 1EC-68-2-6 Fc
- RF field emission test per EN 55022 Class B
- Conducted immunity tests
- Electrostatic discharge EN61000-4-2
- RF field immunity EN6100-4-3
- Fast transient burst EN61000-4-4
Warranty
For certain products Vaisala normally gives a limited one-
year warranty. Please observe that any such warranty may
not be valid in case of damage due to normal wear and tear,
exceptional operating conditions, negligent handling or
installation, or unauthorized modifications. Please see the
applicable supply contract or Conditions of Sale for details
of the warranty for each product.