HighPoint RocketRAID 2320 - Manual (Page 11)

RocketRAID 2320 Hardware
1 – RocketRAID 2320 Adapter Layout
Port1- Port8
These represent the RocketRAID 2320’s eight SATAII channels. The SATA port
furthest away from the surface of the adapter is always the odd numbered channel (1,
3, 5, 7), while the port closest to the adapter is the even numbered channel (2, 4, 6, 8).
J2, J3, J4, J5
LED connectors (disk-activity/disk-failure): LED support is discussed in greater detail
in the LED Connection section, and in a separate document, the RocketRAID 2320
LED guide (which discusses LED installation for server chassis). The LED Guide will
be available for download, from our website.
JP3 and JP4
These jumpers enable cross-adapter RAID support. The RocketRAID 2320 includes a
cable designed for use with these jumpers. Consult the Single-RAID Cross Adapter
section (page 2-4) for more information.
BEEP1 - Speaker
Alarm (speaker): the speaker emits and audible alarm in the case of disk/array failure.
JP5
I²C jumper/SAF-TE support: this support is dependent upon the system chassis.
Not all chassis models support SAF-TE features. Consult the chassis’s manual for
more information.
RocketRAID 2320 Hardware Description/Installation
2-1