HighPoint RocketRAID 2522 User Manual
Page 29
RocketRAID 2522 Driver and Software Installation
Logging On
The RAID Management Console requires that a user (or Administrator) log on. The
software is incapable of working with RAID arrays or hard disks attached to the
RocketRAID 2522 until the user has logged on.
Default Parameters:
System Address: 127.0.0.1
Port: 7402
User Name: RAID
Password: hpt
Logging On (continued)
Note: The password and user name fields are case sensitive.
The first time the software is used, make sure to enter the information listed above.
After successfully logging on, the software will ask you to alter the password (as a
security precaution).
Enter a password, and press enter.
2 - Software Interface - Overview of commands/func-
tions
After logging on, several new options will become available.
These commands are displayed towards the top of the interface window:
4-6