Rocketu dual usb 3.0 for mac – HighPoint RocketU 1022A User Manual
Page 5
5
4.
Select the 'Device Manager' button.
5.
For Vista, Server 2008, Win7, Expand the 'Universal Serial Bus Controllers' entry
6.
Right‐click on 'ASMedia xHCI Controller'
7.
Select 'Properties'
8.
Select the 'Driver' tab
9.
Select the 'Driver Details' button
10.
The follow file should be displayed, then installation was successful:
‐'system32\DRIVERS\asmtxhci.sys' Vista, Server 2008 and Win7
RocketU Dual USB 3.0 for Mac
Once you have installed the RocketU Dual USB 3.0 for Mac Card and booted your Mac,
follow these instructions to install the drivers and the HighPoint Web Manager
software:
1)
Insert the RocketU Dual USB 3.0 for Mac Card Install Disc into your Mac and
navigate to the DMG folder.
2)
Double‐click on the “dig” file to mount the disc image containing the Mac OS X
software and drivers.
3)
Double‐click on the installer package labeled
to start the installation
process.
4)
Follow the on‐screen steps to complete the installation process. After the install
has completed, you will be prompted to restart your computer. You will need to
restart in order to use the RocketU Dual USB 3.0 for Mac Card.
Note: Consult the software copy of the RocketU Dual USB 3.0 for Mac User Guide for
in‐depth installation procedures.