Bondioli&Pavesi 399USBR15 - Manual (Page 23)

23
ENG
Grease the internal drive tube and reassemble the shielding on the driveshaft.
Check the length of the driveshaft at its minimum and maximum extensions
on the implement.
TROUBLESHOOTING
WEAR OF YOKE EARS
EXCESSIVE WORKING ANGLE
• Reduce the working angle.
• Disengage PTO when joint angle exceeds 45°.
DEFORMATION OF YOKES
EXCESSIVE TORQUE PEAK OR SHOCK LOAD
• Avoid overloading or engaging PTO when under load.
• Check the efficiency of the torque limiter.
CROSS ARM BROKEN
EXCESSIVE TORQUE PEAK OR SHOCK LOAD
• Avoid overloading or engaging PTO when under load.
• Check function of torque limiter.
ACCELERATED WEAR OF CROSS ARMS
EXCESSIVE LOAD
• Do not exceed the speed or power limits indicated in the instruction manual.
INSUFFICIENT LUBRICATION
• Follow instructions in point 37.
SEPARATION OF TELESCOPING TUBES
EXCESSIVE EXTENSION OF DRIVELINE
• Do not extend driveline to the point that the tubes separate.
• For stationary machinery, position the tractor so the telescoping tubes overlap
as illustrated in point 10.
TWISTING OR BENDING OF TELESCOPING TUBES
EXCESSIVE TORQUE PEAK OR SHOCK LOAD
• Avoid overloading or engaging PTO when under load
• Check the efficiency of the torque limiter.
• Check that driveline does not come into contact with tractor or implement
components during manoeuvres.
ACCELERATED WEAR OF TELESCOPING TUBES
INSUFFICIENT LUBRICATION
• Follow instructions in the chapter on Lubrication
INSUFFICIENT TUBE OVERLAP
• See instructions in point 10.
PREMATURE WEAR OF THE PROTECTIVE BEARINGS
INSUFFICIENT LUBRICATION
• Follow the instructions in point 37.
RESTRAINT CHAIN NOT CORRECTLY FIXED
• See instructions in point 19.
All the plastic parts of Bondioli & Pavesi drivelines are totally recyclable.
Protect the environment by disposing of used plastic parts properly at the
time of replacement.
78
79
80
85
81
82
86
87
83
84
77