Ronbow Rowena - Manual

Installation Sheet
www.ronbow.com
For installing WOOD top:
Ronbow Corporation, All Rights Reserved.
ROWENA
24”/32”/36”
For installing GLASS top:
Screw on chrome spacers (parts A, B, & C)
to leg support. Glass top is placed on top of
spacers.
Contempo Collection
Chrome spacers (parts A, B, & C) maybe used
but not necessary. Wood top may be placed
on spacers or may be glued to leg supports by
using silicone adhesives.
For installing STONE top:
Discard chrome spacers and use silicone
adhesive to secure top to leg support.
For installing leg support:
For installing towel bar (T):
Drill towel bar holders (part F) into each leg
support and insert towel bar (T). Use set screw
(part G) to tighten.
Drill screws (parts D &E) into wall through
holes in leg supports. There should be 4 holes
per each leg support. Please make sure there
is proper support behind the wall in your drill
location. Different wall materials may require
different screw types. Please consult your local
hardware store.
For installing bottom shelf(s):
The bottom shelf rests on the bottom ledge of
the leg supports. No adhesives are necessary. h
h
Note: Towel bar (T), bottom Drawer and Bottom Shelf
(S) are optional and it must be purchased separately.
Step 1: Release the lever on each side, according to the
arrows and pull out drawer.
Step 2: screw to the side of the stand
Installing Bottom Drawer
Counter Top
Bottom Shelf (S)
Vanity: Drawer: 500030
500033
667025
667033
667037